Ford Everest Next Gen 2022on (raised or flush rails) Yakima Rugged Line Platform 2130x1230mm (9812177/9820341)
Product load rating is how much weight can be added on top of the rack while driving on a paved or sealed road.
Your car’s maximum load capacity may be lower than the product load rating. In that case, the lowest load rating applies. Please refer to your vehicle manufacturer’s specifications.
Load rating overview
STATIC
When the vehicle is parked or stationary.
ON ROAD
Driving on paved or sealed roads.
OFF ROAD
Driving on unsealed or dirt roads.
- Static load rating: This is the maximum weight that can be added while the car is stationary. It can usually hold three times the on-road load rating. So, if you have a tent, that’s why you can sleep in it.
- On-road load rating: This is the weight limit while driving on sealed roads. This is what the product load rating refers to.
- Off-road load rating: This is the weight limit on unsealed roads. It is typically lower than the on-road capacity by 30%.
Why is the load rating displayed lower than on other websites?
Most other websites only display the load rating of the product. When possible, we aim to provide the true and real load rating, which needs to take into consideration the car make and model, the rack, and the fittings used. We have been fitting racks for over 50 years, so we have the experience to provide true and accurate load ratings.
Important: Overloading beyond these ratings can damage your vehicle, void warranties, or cause accidents. Always include the weight of the rack and accessories in your calculations.
Suits Ford Everest (2022 onwards NEXT GEN). Yakima RuggedLine® is a premium platform-to-vehicle mounting system and the unique and versatile LockNLoad™ Platform allows you to carry your gear with ease.
- Description
- Additional information
Description
Ford Everest Next Gen 2022on (Raised or flush rails) Yakima Rugged Line Platform 2130x1230mm (9812177/9820341)
Suitable for all varients of the Ford Everest Next Gen including Ambiente, Trend, Sport, Platinum and Wildtrak models.
Existing factory fitted rails (Flush or raised) need removing, this is done by loosening bolts from top of vehicle, loosen and lower internal lining. The Ruggedline is then fixed into the existing holes, all bolts and nuts included for install. Lining then installed to vehicle.
Every slat incorporates a 21mm accessory slot, with drop-in cutouts, for easy mounting of all kinds of accessories and carriers. Plus, the slat’s width is designed for compatibility with Yakima clamp-type mounts.
This Platform’s slats run across the vehicle (“east-west”), just like normal roof racks do. This provides greater flexibility when choosing accessories, more tie down options and better load distribution.
All sides of the Platform’s perimeter feature a top slot for mounting accessories. Even high lift jack and awnings won’t make it sag or bend, given the ample reinforcement from slats, corner inserts and spine segments.
Constructed from powdercoated aluminium, with additional e-coating in critical areas, the LockN’Load Platform will survive the harshest of Australian conditions.
Yakima RuggedLine® is a premium platform-to-vehicle mounting system.
The unique and versatile LockNLoad™ Platform allows you to carry your touring or off-road gear with ease.
- Designed and tested in Australia
- Extensively tested for performance and wind noise
- Rugged Line constructed from powder coated stainless steel
- The larger hexagonal cut out design allows for better access and easier installation
- Modern, faceted and angular aesthetic aligned with current automotive styling
- Tools for assembly supplied
Components:
1x Platform E (2130mmx1230mm)
1x 9812177 RuggedLine Ford Everest Base Gen 3 SUV
Instructions
LockNLoad Platform fitting instructions
RuggedLine fitting instructions
Additional information
Manufacturer | Yakima |
---|
You may also like…
-
-
Ford Everest Next Gen 2022 onwards – Bonnet anti-glare strip | Solarscreen Dash Shade
Pre-Order - 10-12 Weeks Until Dispatch$149.00$139.40Add to cart