Ford Next Gen July 2022on Wildtrak Pioneer Tradie Platform with Backbone (1528x1236mm) (45100B/RFRB3)
Product load rating is how much weight can be added on top of the rack while driving on a paved or sealed road.
Your car’s maximum load capacity may be lower than the product load rating. In that case, the lowest load rating applies. Please refer to your vehicle manufacturer’s specifications.
Load rating overview
STATIC
When the vehicle is parked or stationary.
ON ROAD
Driving on paved or sealed roads.
OFF ROAD
Driving on unsealed or dirt roads.
- Static load rating: This is the maximum weight that can be added while the car is stationary. It can usually hold three times the on-road load rating. So, if you have a tent, that’s why you can sleep in it.
- On-road load rating: This is the weight limit while driving on sealed roads. This is what the product load rating refers to.
- Off-road load rating: This is the weight limit on unsealed roads. It is typically lower than the on-road capacity by 30%.
Why is the load rating displayed lower than on other websites?
Most other websites only display the load rating of the product. When possible, we aim to provide the true and real load rating, which needs to take into consideration the car make and model, the rack, and the fittings used. We have been fitting racks for over 50 years, so we have the experience to provide true and accurate load ratings.
Important: Overloading beyond these ratings can damage your vehicle, void warranties, or cause accidents. Always include the weight of the rack and accessories in your calculations.
The Pioneer Platform with Rhino-Rack Backbone System is the ultimate load carrying solution for your vehicle. Is made from reinforced nylon and aluminium which creates a lightweight strength that is incredibly durable. Existing factory fitted top rubber needs removing, this is done by loosening the interior head lining. The backbone is then fixed into the existing holes.
- Description
- Additional information
- Specifications
- FITTING INSTRUCTIONS
Description
Ford Next Gen July 2022on Wildtrak Pioneer Tradie Platform with Backbone (1528x1236mm) (45100B/RFRB3)
The Pioneer Tradie is built with tough-as-nails reinforced nylon and aluminum and has been tested in the harshest outdoor conditions. It’s also non-corrosive so it won’t rust or fade. It also features fully-welded side rails to make loading and unloading your gear easier. You can rest assured knowing that your equipment is safe on the road.
Existing factory fitted top rubber needs removing, this is done by loosening the interior head lining. The backbone is then fixed into the existing holes, all bolts and nuts included for install. New full length rubber and infill moulded ends is then provided to replace removed rubber. See photos attached showing the existing removed rubber, exposed roof holes and all fitting components (included blue trim remover tool).
Tradespeople will also love the tray’s compatibility with a large variety of Rhino-Rack accessories. A Rhino-Rack Rear Roller would make loading ladders and planks on to the tray a breeze. Our Shovel and High Lifting Jack Holder bracket, Rhino-Rack ladder and Pioneer Combination Bracket are also some of the many available accessories that will fit the Tradie Tray.
Even if you’re not a tradie – the Pioneer Tradie still has great potential. Imagine being able to easily carry your fishing rods along with the rest of your weekend gear on the one tray. Or picking up supplies for your DIY home renovation and not worrying about how you’ll get it back home.
Get your load from A to B hassle free with the Pioneer Tradie.
Components
1 x 45100B
1 x RFRB3 Backbone for 2022onwards NEW Gen Ford Ranger and Wildtrak (suits all series)
6 x M8 Channel nuts and 6 x M8 bolts x 20mm with washers to connect backbone to Tradie
Features:
- Stylish and aerodynamically designed to minimise wind drag and noise on the road
- Non corrosive so it won’t rust or fade
- Made from strong and durable materials and allows you maximum carrying capacity
- Bars included with the Pioneer Platform
- Compatible with many Rhino-Rack accessories
- Additional rail kits are available
Components:
1x 45100B Pioneer Tradie Platform (1528mmx1236mm)
1x RFRB3 Backbone Mounting system for Ranger P703 ( XL, XLS, XLT &Â Sport )
Thinking of hitting the road but need some new gear? View our huge range of roof racks, canopy racks, shade awnings, luggage boxes, bike carriers and more.
Not sure where to go with the family for your next road trip or adventure? Check out these 7 incredible free camping spots around Australia.
Additional information
Manufacturer | Rhino-Rack |
---|
- # Of Planks: 4
- Cross Bars Inc: Included
- External Dimensions: 1528
- External Dimensions: 1236
- External Dimensions: 39
- Leg Profile: Backbone
- Pioneer Systems: Platform
- Pioneer Systems: Tradie
- Pioneer Systems: Tray
- Warranty: 5 Years
- Static Load Rating: 320kg