Kaon Roof Rack Table Slide Mount (KS0586)

Roof Rack Table Slide Mount to suit Platform Racks

A good table is a camping staple. The biggest issue? Big and flat, they often end up right at the bottom of a pile of stuff in the back of the car, and aren’t easy to access when you want a quick setup on the road.

Our Roof Rack Table Slide Mount enables you to secure a trestle table to the underside of your roof rack, taking advantage of underutilised space and leaving the surface of your platform free to carry whatever you need.

FEATURES:

• Provides instant access to your table, no need to move all your stuff to get to the table in the back of your car.
• Utilise wasted space under your rack, while leaving the surface of your roof rack platform totally free. 
• Slide mounts are held in place with a series of clamps secured to cross rails on the underside of the platform. 
• A tight-fitting locking bar secures the table, and stoppers keep it rattle-free. 
• The locking bar has holes to allow for a padlock to be fitted to either side. 
• Table stores upside down, keeping the table working surface clean and the legs secure. 
• Once fitted, the mount is ‘set and forget’ – simply remove the table and locking bar when not in use.
• Made from stainless steel in a brushed finish, so it’s hard-wearing and won’t rust.

Our Roof Rack Mount does not include the table. Our mount is designed to suit the Marquee 4ft Trestle Table available at Bunnings here. 

RACK COMPATIBILITY:

50mm clearance is needed from the underside of all roof racks to the roof, at the narrowest point.

• Compatible with Rhino-Rack Pioneer Platform Series 4 or 5/6. Note that provided hardware may not suit platforms mounted on top of Cross Bars.
• Compatible with Front Runner Slimline II. 

For information on adding clearance to your rack, see FAQ or the optional Backbone Spacer Kit information below. 

INCLUDES:

Select Rhino-Rack Pioneer Platform Series 4, Series 5/6, or Front Runner Slimline II above:

• 1 x Roof Rack Table Slide Mount
• All the hardware you need to complete the installation of the Table Slide Mount 
• Optional: Rhino-Rack Backbone 10mm spacer kit

Australian Designed, Made and Owned.