Roof Racks

  • Rhino-Rack 43152 Double Horizontal Jerry Can Holder

    Take enough fuel or water to get you to remote destinations with the Rhino-Rack Double Horizontal Jerry Can Holder. This ultra useful new product comes with Ratchet Tie Downs and Locking Cables.

    $226.00 $179.00

    or 4 payments of $44.75 with Afterpay

  • Mitsubishi Pajero NS-NX 4dr 4WD LWB 11/06on Rhino-Rack Backbone Pioneer Platform (2128mmx1236mm)

    The sleek and stylish Pioneer Platform with Rhino-Rack Backbone System is the ultimate load carrying solution for your vehicle. The black powder-coated design makes life easier by allowing you to load and unload your equipment in moments. The Pioneer Platform is made from reinforced nylon and aluminium which creates a lightweight strength that is incredibly durable. The non-corrosive Pioneer Platform has withstood testing in the harshest conditions around the world so you know it can be trusted.

    $1,557.00 $1,499.00
  • Mitsubishi Pajero NS-NX 4dr 4WD LWB 11/06on Rhino-Rack Backbone Pioneer Tradie (2128mmx1236mm)

    The Pioneer Tradie with Rhino-Rack Backbone System is perfect for transporting ladders, pipes and timber on your vehicle. Sporting a stylish aerodynamic design with built in side rails, it is a functional and fashionable addition to your vehicle.

    $1,726.00 $1,685.00
  • Mitsubishi Pajero NS-NX 4dr 4WD LWB 11/06on Rhino-Rack Backbone Pioneer Tray (2000mmx1140mm)

    The Pioneer Tray with Rhino-Rack Backbone System is perfect for transporting extra gear on your vehicle. Sporting a stylish aerodynamic design and sleek black finish, it’s not only a functional addition to your vehicle, but a fashionable one too.

    $1,840.00 $1,799.00
  • Nissan Pathfinder 4dr 4WD With Roof Rails 07/05-09/13 Rhino-Rack Silver Pioneer Platform (1528x1376mm)

    The Pioneer SX Platform is a sleek and stylish load carrying solution for your vehicle. Made with strong, durable and lightweight reinforced nylon and aluminium, these non-corrosive Pioneer SX Platforms have been tested in the most rugged conditions and have passed with flying colours.

    $1,100.00 $899.00

    or 4 payments of $224.75 with Afterpay

  • Rhino-Rack 43249 Pioneer Wind Fairing – 1130mm / 44″

    The Rhino-Rack Pioneer Wind Fairing has been engineered to reduce the wind noise as it deflects the air around your load which keeps it quiet whilst driving.

    $203.00 $189.00

    or 4 payments of $47.25 with Afterpay

  • Rhino-Rack 43250 Pioneer Wind Fairing – 1272mm / 50″

    The Rhino-Rack Pioneer Wind Fairing has been engineered to reduce the wind noise as it deflects the air around your load which keeps it quiet whilst driving. We’ve also styled this product so that it enhances the sleek design of your vehicle and roof racks. The Rhino-Rack Pioneer Wind Fairing is compatible with our Rhino-Rack Pioneer Systems making it easy to install or remove if necessary.

    $203.00 $189.00

    or 4 payments of $47.25 with Afterpay

  • Rhino-Rack 43251 Pioneer Wind Fairing – 1332mm / 52″

    The Rhino-Rack Pioneer Wind Fairing has been engineered to reduce the wind noise as it deflects the air around your load which keeps it quiet whilst driving. We’ve also styled this product so that it enhances the sleek design of your vehicle and roof racks. The Rhino-Rack Pioneer Wind Fairing is compatible with our Rhino-Rack Pioneer Systems making it easy to install or remove if necessary.

    $203.00 $189.00

    or 4 payments of $47.25 with Afterpay

  • Ford Everest 3rd Gen 4dr SUV With Flush Rails 10/15on Rhino-Rack Backbone Pioneer Tradie (1928mmx1236mm)

    The Pioneer Tradie with Rhino-Rack Backbone System is perfect for transporting ladders, pipes and timber on your vehicle. Sporting a stylish aerodynamic design with built in side rails, it is a functional and fashionable addition to your vehicle.

    $1,636.00 $1,599.00
  • Ford Everest 3rd Gen 4dr SUV With Flush Rails 10/15on Rhino-Rack Backbone Pioneer Platform (1928mmx1236mm)

    The sleek and stylish Pioneer Platform with Rhino-Rack Backbone System is the ultimate load carrying solution for your vehicle. The black powder-coated design makes life easier by allowing you to load and unload your equipment in moments. The Pioneer Platform is made from reinforced nylon and aluminium which creates a lightweight strength that is incredibly durable. The non-corrosive Pioneer Platform has withstood testing in the harshest conditions around the world so you know it can be trusted.

    $1,523.00 $1,499.00
  • Ford Everest 3rd Gen 4dr SUV With Flush Rails 10/15on Rhino-Rack Backbone Pioneer Tray (1800mmx1140mm)

    The Pioneer Tray with Rhino-Rack Backbone System is perfect for transporting extra gear on your vehicle. Sporting a stylish aerodynamic design and sleek black finish, it’s not only a functional addition to your vehicle, but a fashionable one too.

    $1,749.00 $1,700.00
  • Mitsubishi Pajero 4dr 4WD NM-X (no rails) Rhino-Rack Pioneer Platform (1928mmx1376mm)

    The Rhino-Rack Pioneer Platform fits directly to the specific tracks installed on the vehicle. Made with strong, durable and lightweight reinforced nylon and aluminium, these non-corrosive Pioneer Platforms have been tested in the most rugged conditions, the only rack with 100kgs carrying capacity. Supported by 6 rhino rack legs, fitted to the specific tracks (installed by opur trained staff or DIY). Very low profile to the roof.

    $1,604.00 $1,580.00
  • Mitsubishi Pajero 4dr 4WD NM-P (no rails) Rhino-Rack Pioneer Tradie

    The Pioneer Tradie is perfect for transporting ladders, pipes and timber on your 4WD or utility. Sporting a stylish aerodynamic design with built in side rails, it is a functional and fashionable addition to your vehicle.

    $1,694.00 $1,660.00
  • Nissan Navara 4dr Ute Dual Cab D40 (ST/ST-X) 11/05 to 06/15 Rhino-Rack Pioneer Platform

    The Rhino Pioneer Platform is a sleek and stylish roof rack accessory for a range of 4WDs and utilities. Made with strong, durable and lightweight reinforced nylon and aluminium, these non-corrosive Pioneer Platforms have been tested in the most rugged conditions and have passed with flying colours.

    $1,374.00 $1,349.00
  • Toyota Prius 5dr Hatch 10/03-06/09 Rola Roof Rack (Front bar only)

    An easily removable roof rack to suit your Toyota Prius.

    $200.00 $150.00

    or 4 payments of $37.50 with Afterpay

  • Ford Ranger PX/Raptor/ Mazda BT50 10/2011on 4dr Dual Cab Rhino-Rack Silver Vortex Roof Racks (pr)

    If you’re after a roof rack that is adaptable, easy to use, strong and light, then the Rhino Vortex 2500 roof rack is your new best friend. No need for specialist fitment – you can install the Vortex 2500 to your vehicle yourself at home in a few quick, easy steps. This roof rack is designed to fit gutterless vehicles and is completely remove-able.

    $406.00 $395.00

    or 4 payments of $98.75 with Afterpay

  • Holden Colorado 4dr Crew Cab / Isuzu D-Max 4dr Crew Cab TF 06/12on Rhino-Rack Vortex Roof Racks (pr)

    If you’re after a roof rack that is adaptable, easy to use, strong and light, then the Rhino Vortex 2500 roof rack is your new best friend. No need for specialist fitment – you can install the Vortex 2500 to your vehicle yourself at home in a few quick, easy steps. This roof rack is designed to fit gutterless vehicles and has a removable mount.

    $392.00 $379.00

    or 4 payments of $94.75 with Afterpay

  • Holden Colorado/Isuzu D-Max 4dr Ute Crew Cab 06/12on Rhino-Rack Vortex Quick Mount Roof Racks (pr) (Excludes D-Max SX model)

    This Vortex Quick Mount™ RLT600 roof rack system is fixed to your roof using a specialised track. However, the legs and cross bars can be easily removed when they are not required using a simple trigger locking system.

    $684.00 $670.00

    or 4 payments of $167.50 with Afterpay

  • Holden Colorado 4dr Crew Cab / Isuzu D-Max 4dr Crew Cab TF 06/12on Rhino-Rack Euro Roof Racks (pr)

    The Euro 2500 roof rack system is matched to fit the contours of your vehicle’s roof. Easy to install and remove – it is ideal as a non permanent solution yet offers great strength and durability.

    $318.00 $305.00

    or 4 payments of $76.25 with Afterpay

  • Holden RA Rodeo/Colorado 4dr Ute Crew Cab 03/03-05/12 Rhino-Rack Vortex Roof Racks (pr)

    If you’re after a roof rack that is adaptable, easy to use, strong and light, then the Rhino Vortex 2500 roof rack is your new best friend. No need for specialist fitment – you can install the Vortex 2500 to your vehicle yourself at home in a few quick, easy steps. This roof rack is designed to fit gutterless vehicles and has a removable mount.

    $392.00 $379.00

    or 4 payments of $94.75 with Afterpay

  • Toyota FJ Cruiser 2dr 4WD 03/11on Rhino-Rack Vortex Roof Racks (pr)

    The RVP roof rack system is specifically moulded to fit a select range of vehicles which feature factory mounting points. By attaching via these mounting points, you can be assured of a perfect fit.

    $401.00 $389.00

    or 4 payments of $97.25 with Afterpay

  • Toyota Hilux 4dr Ute Double Cab 10/15on Rhino-Rack Vortex Flush Black 2 Bar Roof Rack (pr)

    The ROC25 Flush roof rack system is specifically moulded to fit the contours of your vehicle’s roof and features a great sporty look.

    $421.00 $410.00

    or 4 payments of $102.50 with Afterpay

  • Toyota Hilux 4dr Ute Dual Cab 04/05-09/15 Rhino-Rack Vortex Quick Mount Roof Racks (pr)

    This Vortex Quick Mount™ RLT600 roof rack system is fixed to your roof using a specialised track. However, the legs and cross bars can be easily removed when they are not required using a simple trigger locking system.

    $600.00 $580.00

    or 4 payments of $145.00 with Afterpay

  • Toyota Hilux Dual Cab 04/05-09/15 Rhino-Rack Vortex Roof Racks (pr)

    Easy to use, the Rhino Vortex 2500 roof rack is easy to install and remove, has a carrying capacity of 75kgs, suitable for ladders and tradie gear, but not recommended for corrugated roads.

    $392.00 $379.00

    or 4 payments of $94.75 with Afterpay